Hose Boom

Used by professionals to wash or hose down horses without the usual hazards of a hosepipe on the ground; it also makes the task much easier.

The sturdy steel construction, hot dip galvanised after manufacture, is hinged on wall brackets allowing the boom to be folded back to the wall when not in use.

Sectionalised into four main parts, maximum piece length 1.2m for easy delivery; simply bolt together using the included M12 x 30mm bolts - 19mm spanners required.

Internal diameter of steel tube is approx 25mm/1 inch; this allows for good quality hose pipe. (The durable hot dip galvanising can make the internal tube diameter slightly variable. Hose pipe not supplied). (HS Code: 83024900)

Instructions:-

Lay boom parts out on ground and thread hose pipe through all four sections prior to inserting bolts; 19mm spanners required for tightening.

Installation height should be set to suit application.

Wall fixings for hinges (screws/bolts) should be chosen to suit wall construction. (These fixings are not included).

Height 241 cm
Width 10 cm
Weight 16 kg
Projection 270cm
Packed size 121cm x 33cm x 15cm